Author Topic: Sump Oil Strainer unit  (Read 880 times)

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6311
    • View Profile
Re: Sump Oil Strainer unit
« Reply #15 on: August 25, 2021, 11:47:42 AM »
Faced with their imminent extinction  :o and if no pattern part emerges to fill the void, can more frequent oil changes be enough to cope with not having one at all?

I  suspect it's needed as all cars have them as well as an oil filter- if you have debris in the gearbox for instance (where engine/gearbox share the same oil) it's going to drop into the sump and get sucked into the pick up so a strainer is essential in my view to keep out large bits of metal or rubber etc.

In the complete absence of a replacement I guess it will be a case of adapting one from another engine and joining it to the same end fitting.

Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html

Offline Bryanj

  • Grogu
  • *
  • Posts: 10820
    • View Profile
Re: Sump Oil Strainer unit
« Reply #16 on: August 25, 2021, 03:21:56 PM »
It has to be there as the hole it fits into snugly is too high upnfor oil to be reliably sucked in

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal