Author Topic: Any idea where this part comes from?  (Read 549 times)

Offline RBoss

  • Newbie
  • Posts: 28
  • CB500 Four K0 1975
    • View Profile
Any idea where this part comes from?
« on: November 27, 2021, 10:44:11 AM »
Hi all,

I am in the middle of taking my bottom end apart to replace my primary chain + rubbers. Going smooth (so far), making notes and labeling parts, but (i think) after flipping the bottom end over to loosen the bottom case bolts I found something lying on my workbench. I couldn't find where the fiddly part comes from and the manual didn't mention it.

Is it some kind of oil jet?

The situation:
[ Guests cannot view attachments ]

The part:
[ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]


Anyone who recognises it?

Cheers,
Ruben

CB500 Four K0 1975
Amsterdam - Netherlands

Offline Bryanj

  • Grogu
  • *
  • Posts: 10776
    • View Profile
Re: Any idea where this part comes from?
« Reply #1 on: November 27, 2021, 11:01:16 AM »
Goes between crankcase and barrells, should be two, one ate each side and only fit one way up. Make sure they are clean.

NO silicone gasket goo anywhere

Offline murdock

  • SOHC Member
  • Posts: 195
    • View Profile

Offline RBoss

  • Newbie
  • Posts: 28
  • CB500 Four K0 1975
    • View Profile
Re: Any idea where this part comes from?
« Reply #3 on: November 27, 2021, 02:51:54 PM »
Goes between crankcase and barrells, should be two, one ate each side and only fit one way up. Make sure they are clean.

NO silicone gasket goo anywhere


Thanks! After pulling the primary shaft out the other one fell out as well  ;D. All clear, thanks for the help!
CB500 Four K0 1975
Amsterdam - Netherlands

Offline Bryanj

  • Grogu
  • *
  • Posts: 10776
    • View Profile
Re: Any idea where this part comes from?
« Reply #4 on: November 27, 2021, 04:21:14 PM »
No problem, i know most of the parts on the 500/550

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal