Well, took it to work this morning. Its been a minute since i rode a carb'd bike!
1. Have to give it the beans a little bit on pull-away....!
2. Front brake is a bit spongy and weak but ill let it settle in as the pads are new - theres definately no air in there so might need a rebuild kit for the master cylinder.
3. Have to remember to use the choke!
4. Chain is rusty as, but ok so for the cost ill get a new one on order.
5. Bit of play in the throttle cable so ill adjust that out....
6. Only got the one ignition key (and original one) so ill get another one cut at lunchtime.
Stuff to do....
1. Rear mudguard is gonna get the rechroming treatment along with a coupl of other things..
2. As above - chain.
3. More of a motogadget question but when i hit the starter (and it starts) the full beam comes on and not the dip....pretty sure ive got it all wired in so could be a setting...
4. New rear shocks for nothing more than the bling.
5. Gonna change the oil after (im guessing) another half a dozen rides...im assuming after a rebuild theres gonna be some stuff swishing around...
6. Throtle cable as above...
7. One of those steel dragon air filters...for the look and....it makes it tons easier to remove the carbs if i ever need to...
Anyway - thats it for now...but more than anything else...its in one piece and it works! - hopefully itll get me home tonight!
