Author Topic: Is this right?  (Read 737 times)

oldchuffer

  • Guest
Is this right?
« on: May 11, 2022, 04:43:37 PM »
Putting the footrests on the bike and i seem to have more bolt left than i would expect, am i missing something or is my through bolt maybe not the right one? [ Guests cannot view attachments ] [ Guests cannot view attachments ]

Offline cbxman

  • SOHC Member
  • Posts: 108
    • View Profile
Re: Is this right?
« Reply #1 on: May 11, 2022, 04:59:13 PM »
I think there should be a lock washer under the nuts.  The flat washers on my bike are thicker too.

Cheers,

Jerry
CB750 K1 1971 Wisconsin, USA
Suzuki GT550 J 1972 Michigan USA
CB360 G5 1975 UK
CBX1000 A 1980 (European Direct Sales)
CB1300 A5, 2005 UK

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6123
    • View Profile
Re: Is this right?
« Reply #2 on: May 11, 2022, 05:16:08 PM »
Mine have quite a few threads showing even with my original washers that are about 2.5 to 3.0 mm thick each.
Mine did not have a spring washer the parts manual  shows there is one - I'll look for them in my junk pile now!
« Last Edit: May 11, 2022, 05:27:17 PM by McCabe-Thiele (Ted) »
Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html

oldchuffer

  • Guest
Re: Is this right?
« Reply #3 on: May 11, 2022, 05:46:23 PM »
Thanks for the responses, i should have checked the parts book, i'll search in my box of bits for suitable washers.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal