SOHC.co.uk Forums > CB350/400
400/4 is popping & banging with poor mpg where to start?
McCabe-Thiele (Ted):
This evening I fired up the 400 from cold I let it run at between 2- 2500rpm for some 20 seconds then checked the front pipes.
Number 1 & 3 cylinder are virtually cold - number 2 & 4 nice & hot.
So where do I start to diagnose what the problem(s) are please?
An Idiots guide if you will of the best logical steps I need to take in sequence please?
Oddjob:
Tap the float bowls Ted in case the floats are stuck shut.
K2-K6:
Also get the plugs out and post decent pictures of them to help identify problem.
Are the 1+3 just wetted with little combustion?
McCabe-Thiele (Ted):
Yes I clearly need to remove the plugs & see what's going on with cylinders 1 & 3 thanks for the initial pointers.
Off to Wales for this weekend with a planned boat trip over the Pontcysyllite Aquaduct - bike will have to wait until Monday unless I can sneak the plugs out before we go.
I've only ever walked over the Aquaduct when I was a teenager in 1968 - it's just taken me a while to re-visit the marvelous piece of Telford engineering.
TrickyMicky:
Enjoy the aqueduct, Ted. It's quite an 'interesting' perspective if you admire the view from the West facing side, (not the towpath side!). Mike.
Navigation
[0] Message Index
[#] Next page
Go to full version