Other Stuff > Desperately Seeking!!
Axle Wrench
Bryanj:
Locknut is 10mm, Ken 40thou to the mm so 0.8 is 32thou, is it not 0.08?
Oddjob:
Probably Bryan, I know what I meant though ;D ;D
If you ever see Snap On vans in Oz maybe just stop and ask if he has one onboard. If not you can get them to order one.
Lobo:
Having a cuppa tea with Lindsay yesterday (engine builder) who too wasn’t sure what the Bar B tool is for. He identified the throttle cable adjuster barrel as the only 8mm piece on the bike, and suggested this is why Honda added those jaws to the plug socket bar. Makes sense…
Ken, found a 3” set of feelers in a local tool store so have a Pan B in place. Many thanks.
Seabeowner:
I see Roger Etcell has one listed at present.
Laverdaroo:
I'm off back to the states in a couple of weeks and I know the chap I see there has totes and totes of all the bits and bobs from tool kits from scrapped Honda's from the last 40 years (and teh packets and plastic covers etc.) If you are desperate, when I go i'll have a rummage if you let me know exactly what you need. If that helps let me know. He GAVE me a complete set for my 550 FOC, hes a top bloke and might be a problem solver for you at a push.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version