Author Topic: Coils/Leads  (Read 2007 times)

Offline PatM

  • SOHC Member
  • Posts: 206
  • 2001 R1, Triumph 1200 and the little 400/4!
    • View Profile
Coils/Leads
« on: June 13, 2010, 09:34:30 PM »
I

Offline Bryanj

  • Grogu
  • *
  • Posts: 10808
    • View Profile
Re: Coils/Leads
« Reply #1 on: June 14, 2010, 07:15:51 AM »
Nope 1 & 4 then 2 & 3 depending on which way round you have the blue and yellow points wires. If the chrome clip is the one the tacho cable goes through it goes on one of the horn mounting bolts










If you mean the chrome

Offline PatM

  • SOHC Member
  • Posts: 206
  • 2001 R1, Triumph 1200 and the little 400/4!
    • View Profile
Re: Coils/Leads
« Reply #2 on: June 14, 2010, 08:59:15 AM »
Thanks- That might have been what I meant.. I have a picture of a 400 with its tank off and I was trying to magnify it to see where the horn went etc- thats when I saw  the error on the photo- hes not coil on the RHS feeding 3 and 4. There is another bracket that I think supports the bunch of wires- although a cable-tie is better!
But I have the chrome clip on wrong and the tacho cables not in it- the throttle cables are- Doh! The Haynes manual's not much good for .
reassembly!

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal