CR750 Replica engine parts

[62tt]

Just looking into building a CR750 replica engine and would welcome advice on any friendly and switched-on UK/European dealers (and recommended manufacturers) for pistons / rods / CR carbs / close ratio clusters, etc., etc.

It will be a pukka job for a serious race bike project.

All advice welcome.

[SteveD CB500K0]

Have you looked here?

There is a wealth of info, experience and a whole bunch of Brit and European enthusiasts!

Steve

[62tt]

Thanks Steve.

[SteveD CB500K0]

I see you've met Sam already!

[SamCR750]

Yes he did and it's looking like all systems are GO.
Next year should see a very fast Honda outfit with one of the worlds top modern day drivers doing battle in the classic classes. Keep you eyes open.

Sam.

[Seamus]

Be interested to see some pictures. There is an ABE big bore kit with rods on Ebay at the moment that may be useful (if allowed in the rules).
I guess an outfit refers to Sidecar, if so what chassis are you using? In the dim and distant past I had an 840 BSA in a Crick chassis (similar to windle).
Does the engine have to have period tuning?

Good luck

Seamus

[SamCR750]

Hi Seamus, as Nick has not released any info yet, i'll leave it to him to tell all.
As much as I can tell you, the capacity is open, the motor is being tuned in the States and built over here using American parts. It's going to be a real flyer.

Sam.

[Yoshi823]

Nice pics here...scroll through to page 20... http://gb.zinio.com/reader.jsp?o=int&pub=107884202&prev=sub&offer=107884204

[62tt]

All will be revealed in good time!

No secrets, but I want to make sure everything is in place and ready to go beforehand.

Maybe towards the end of April 2011 we will have something to show?