Project 550 is go

[gary123]

Can I enquire as to whether that part specific to the 500 models only as my 77 550 F2 doesn’t have one. Unless it’s a parts manual oversight/error and I can’t remember removing one.

Its a 550f1 Im working on now. The 500 I did earlier did not have one.

[Sesman]

That’s interesting as the CMNSL fiche doesn’t show one for the 550F2, but is does for the 500 and 550 F1.

Must be a weight saving measure😀😁

[McCabe-Thiele (Ted)]

Not a part I recognise on my 500.

[Sesman]

Item 11, Ted.

[McCabe-Thiele (Ted)]

Does it attach to the coil bolt that goes through the frame then some sort of guide to keep the loom in the right place?

[Laverdaroo]

Nope never seen one of them, no reference to it on the F2 fiche and I can’t tell what you’re pointing at on that piccy Phil, number 11 looks like the ignition switch or somming, had a wire coming out of it anyway.

So what does it do then?


Sent from my iPhone using Tapatalk

[Sesman]

Sorry, item 17. All thumbs this am.

[McCabe-Thiele (Ted)]

I read the 17 as 11.😁😁😁

[Sesman]

I have no idea. Definitely not a requirement for our high performance F2 variants……Super Sports…..😁

[Nurse Julie]

I think it's got something to do with increasing the surface area of one of the earthing points.

[McCabe-Thiele (Ted)]

In the 500 K1 parts book its item 19 described as  - Protector ignition coil wire.

[Laverdaroo]

I have no idea. Definitely not a requirement for our high performance F2 variants……Super Sports…..😁

Deffer's

[Laverdaroo]

I think it's got something to do with increasing the surface area of one of the earthing points.

AAAaaahhh!

[Sesman]

In the 500 K1 parts book its item 19 described as  - Protector ignition coil wire.

Yes, same description for the F1 item 17.

[andy120t]

It looks to me like a guide for one of the leads. If so, what is it guiding it to or keeping it away from?