Other Stuff > Interchangeability
Rear Lamp needed sought with mounting holes 100mm wide at centre line?
McCabe-Thiele (Ted):
Having recently bought a rear number plate bracket for my UK spec 500 rear mudguard I have found the rear mounting spacing is too wide for the standard for 400/500 Stanley HM11RC lamp unit. The 4 mounting points fit the rear fender perfectly so looks as if its from a different model.
The 400/500 has mounting points some 94/95 mm apart I need a lamp that has 100 mm spacing.
I assume there must be a similar light with the wider fitting can anyone help with the model or part number I need please?
Bryanj:
You have a us 500K2 bracket there and the light that fits will be the large one with 4 screws holding the lens on like on the 550K3 and the late 750
McCabe-Thiele (Ted):
Is that the lamp that looks huge that nobody likes then?
Nurse Julie:
--- Quote from: McCabe-Thiele (Ted) on February 04, 2023, 06:04:10 PM ---Is that the lamp that looks huge that nobody likes then?
--- End quote ---
Yes Ted, it's that big it looks like a barn door bolted on the back end of the bike 😊😊😊
Oddjob:
This one on Ebay, however due to it being a USA bracket and thus chrome instead of black you must also be aware that the number plate holder is smaller than ours. It can mean the screws come through right where the letters are etc
https://www.ebay.co.uk/itm/314315862768?hash=item492eaf72f0:g:xOYAAOSw6y1jvZrG&amdata=enc%3AAQAHAAAAsPj6BE19cRZDHiVHAmau%2FABm5DCfQPoJowrT8yz2cOzI05QZbdChz%2Bxo4jgx5hbbALuJxWKcXKKRA%2Fkm8BDb7qMhCVErGIFuQRGecM1fqp8z2%2Fph7q7c3zN%2Ff7jIelJvJjLWJnLYaSVDq05jBX3ON3bDfaz7xUv4hKijP2rXGvOczshF%2F5TMQHQQcNq%2BwjWPNTbhIJCRjvJeZ0Aemt%2Fc588BRlLS16idmzmRiChPztey%7Ctkp%3ABk9SR6zwt9vDYQ
Navigation
[0] Message Index
[#] Next page
Go to full version