General > Announcements
400/4 fuelTap Filter .
THUNDERDOWNUNDER:
Hi does anyone know where to get the rubber seal for the Filter assembly without buying the Whole set . Thanks .
McCabe-Thiele (Ted):
--- Quote from: THUNDERDOWNUNDER on April 15, 2023, 07:30:43 AM ---Hi does anyone know where to get the rubber seal for the Filter assembly without buying the Whole set . Thanks .
--- End quote ---
IIRC if it's the round tap seal the DS kit does not have the right size O ring so they supply two thinner ones. I ended up using the original one as it was in fair condition.The only other seal iirc is a fibre washer on the Union I think.
Julie might have something suitable - not sure.
McCabe-Thiele (Ted):
This was my tap when I dismantled it.
.Petrol Tap by Macabe Thiele, on Flickr
THUNDERDOWNUNDER:
Middle washer
McCabe-Thiele (Ted):
I'd try a PM to Nurse Julie first - the replacements will probably be Vitron type. Failing that measure it up & try some suppliers.
My strainer was in bits so I bought the kit.
Navigation
[0] Message Index
[#] Next page
Go to full version