cb 500 but not to standard

[gary123]

No, nothing else will be fitted until its in and yes I have a tacho seal somewhere.

[Trigger]

Have you given up with the idea of putting a kick up hoop on the frame ?

[gary123]

For the moment Ill leave as is. Depends on how the back end looks, I can fit a hoop if it doesn't work out.

[gary123]

Moving along nicely. Only real issue has been lack of parts which is stretching the budget somewhat.
Im pressing on with the 550 clutch conversion but its been "challenging".

[Trigger]

Sent you a PM mate 

[Trigger]

Here is the Free choice Gary.



[ Guests cannot view attachments ]



[ Guests cannot view attachments ]

[gary123]

Black one please, see you tonight.

[Trigger]

Black one please, see you tonight.

Do you still need the nipple ? or have you found one .

[gary123]

Sorted the cable, thanks.

[Trigger]

Sorted the cable, thanks.

Ok mate, see you later 

[Nurse Julie]

As discussed Gary.

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[gary123]

Thanks Julie.

[Trigger]

Have a load of the rubbers Gary but, i have two different types at different lengths. I know one is 500/550 F1,F2  the others are 550K3 but can not remember which is which mate. Do you have the old ones to measure up ?



  [ Guests cannot view attachments ]



The two different lengths. As you can see mate, the end ones are taller .



[ Guests cannot view attachments ]  

[gary123]

[ Guests cannot view attachments ]

The distance from manifold to ruler edge is 24mm if this helps.

[Trigger]

Look at the second picture and you will see the end two are slightly higher. The picture is of the middle ones that fit 2&3.

Sent you a PM mate