Author Topic: Teds new project a CB500 K1 mostly version 0.5 circa 1972.  (Read 48086 times)

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6365
    • View Profile
Re: Teds new project a CB500 K1 mostly version 0.5 circa 1972.
« Reply #765 on: Today at 06:33:36 PM »
I woke up knackered this morning so I've not done any actual work as such on the bike - just bimbling about.
I had a small surge of guilt/energy at tea time so decided the big box from Delkevic needs to be evicted from the rear lounge.

I walked the box by standing it on end out of the lounge through the hall - into the kitchen out though the conservatory fighting two little Chihuahua helpers through the last two door onto the back yard to my waiting sack trolley.

I have unpacked the various packs of fittings, one pair of pipes is in the Polystyrene box on the freezer, one is on the floor next to the bike ramp.

Brackets are labeled L/T, R/T - L/B, R/B
I assume that left top & left bottom silencers other for the right side.
I can't see any markings on the silencers themselves such as 1,2,3 & 4.
I hope the boxed pairs are for each respective side.

Some instructions would have been helpful - that's me done for today.
I now need to look seriously for the first pipe & bracket to fit having referance to the previous posts on this subject.
I've spotted one silencer has a square rubber bit - to cushion the stand methinks - left side lower silencer then.
« Last Edit: Today at 07:29:23 PM by McCabe-Thiele (Ted) »
Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal