SOHC.co.uk Forums > CB750
Oil feed to clutch cb750k
Oddjob:
Second link looks like it could be the solution Ted. First link isn't very informative.
There is a mod to increase the oil flow to the clutch plates but if there's no oil in the first place it's kinda redundant.
Pauarc:
I have changed the oil seal under bearings plate not sure if this is the plug
Nurse Julie:
It almost sounds like you have a blockage in the oilway to the clutch 🤔🤔.
Nurse Julie:
--- Quote from: Pauarc on November 20, 2023, 06:08:56 PM ---I have changed the oil seal under bearings plate not sure if this is the plug
--- End quote ---
No, that's a bolt hole, I've circled the plug in red. But some of them didn't have the rubber bung, the gasket covered the oilway. Your bung looks like it's got a hole in it for some reason 🤔🤔🤔🤔
[ Guests cannot view attachments ]
Pauarc:
The plug may be worth a look if the plug is removed I could see if oil is there if I spin on starter motor
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version