Author Topic: Seizing horseshoes  (Read 2683 times)

Offline Athame57

  • SOHC Master
  • Posts: 1374
    • View Profile
    • SeaWitch Artist
Seizing horseshoes
« on: February 02, 2024, 02:39:39 AM »
Much is said of CB400F cam tensioner arms (horseshoes) seizing up, but I don't recall anything being said about repairing them. I'm soon to find out if my own is truly seized up but will this mean I need to buy a new one, or can I get it fixed?
I brake for animals!
1978 CB400F2 called Elen.

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8481
    • View Profile
Re: Seizing horseshoes
« Reply #1 on: February 02, 2024, 08:41:24 AM »
High probability you'll be able to free it off and, fettle it and refit George.
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Bryanj

  • Grogu
  • *
  • Posts: 11380
    • View Profile
Re: Seizing horseshoes
« Reply #2 on: February 02, 2024, 08:45:11 AM »
Siezing is probably not wholly acurate, what happens is a loose camchain batters the metal of the pivot point and burrs it around the pivot, most of the time,but not all, you can fettle the pivot with heat a carefull filing but it can take a couple of hours to get right

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 7508
    • View Profile
Re: Seizing horseshoes
« Reply #3 on: February 02, 2024, 09:06:58 AM »
Bryan describes how mine was - it repaired easily enough the burr I filed away then a combination of heat & sovents to free the pivot that was gummed up with carbon deposits.

I did consider the alloy upgrade but in the end stayed with my original as it was so nice & free.
Honda CB400NA Superdream (current money puddle)
Honda CB500 K1 (second money pit)
https://www.sohc.co.uk/index.php/topic,28541.0.html
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html
This is a neat 500 restoration in the USA.
http://forums.sohc4.net/index.php/topic,151576.msg1731556.html#msg1731556

Offline Oddjob

  • SOHC Jedi
  • Posts: 4296
    • View Profile
Re: Seizing horseshoes
« Reply #4 on: February 02, 2024, 10:24:14 AM »
Keep the camchain properly tensioned and replace the chain when it needs it and it shouldn't happen again. The problem was owners not wanting to spend money on the bike and running the engine into the ground, saying that the design left a little to be desired IMO, far better to copy the 500/550 system but Honda decided not to for some reason. Maybe they just didn't foresee the problems the system would have, lets face it Honda are not well known for camchain tensioning design, CX500 anyone?

If nothing else I'd consider replacing or modifying the pivot pin, IIRC they look like dogs teeth when you remove them.
Kids in a the back seat cause accidents.
Accidents in the back seat cause kids.

Offline Laverda Dave

  • SOHC Jedi
  • Posts: 2920
  • Health is wealth
    • View Profile
Re: Seizing horseshoes
« Reply #5 on: February 02, 2024, 11:05:23 AM »
This is the horseshoe taken from the rat bike. The tensioner adjustment rod was still in its fully compressed position.
Luckily I was able to fix the horseshoe with the aid of a large dustbin and a wad of your best English pounds  :(
1976 Honda 400/4
1977 Rickman Honda CR750
1999 Honda VFR 800FX
1955 750 Dresda Triton
1978 Moto Morini 350 Sport
1978 Honda CB400/4 'Rat' bike
1982 Laverda 120 Jota
2020 Royal Enfield Interceptor 650

Offline Deano400

  • SOHC Pro
  • Posts: 526
    • View Profile
Re: Seizing horseshoes
« Reply #6 on: February 02, 2024, 12:21:26 PM »
Check the condition of the tensioner push rod. This is one I've just had to replace.

[ Guests cannot view attachments ]

Offline Mikep328

  • SOHC Expert
  • Posts: 337
    • View Profile
Re: Seizing horseshoes
« Reply #7 on: February 02, 2024, 12:22:23 PM »
"Luckily I was able to fix the horseshoe with the aid of a large dustbin and a wad of your best English pounds "

 ;) LOL!  Often the best fix for a variety of issues!!

Offline Matt_Harrington

  • SOHC Pro
  • Posts: 893
    • View Profile
Re: Seizing horseshoes
« Reply #8 on: February 12, 2024, 08:40:17 AM »
I've repaired the horsehoes by judicial filing to free it all up.....
Matt
___________________________________
CB400F 1976 -  Almost finished
CB400F 1977 - On the road!
Moto Guzzi Le Mans 2 - 1981 (undergoing a spruce up)
CD175 - To be restored
Triumph Speed 400
BMW F800GT

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 7508
    • View Profile
Re: Seizing horseshoes
« Reply #9 on: February 12, 2024, 09:21:09 AM »
To remove the carbon deposits in the pivot I soaked mine in oven cleaning gell for a couple of days, refreshing the gell after the first 24 hours when it had turned black.
Honda CB400NA Superdream (current money puddle)
Honda CB500 K1 (second money pit)
https://www.sohc.co.uk/index.php/topic,28541.0.html
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html
This is a neat 500 restoration in the USA.
http://forums.sohc4.net/index.php/topic,151576.msg1731556.html#msg1731556

Offline K2-K6

  • Grogu
  • *
  • Posts: 5537
    • View Profile
Re: Seizing horseshoes
« Reply #10 on: February 12, 2024, 09:54:10 AM »
To remove the carbon deposits in the pivot I soaked mine in oven cleaning gell for a couple of days, refreshing the gell after the first 24 hours when it had turned black.

It is exactly this that "seizes" them, oil going over critical temperature and baking into a harder sticky residue to stop movement.

Many engine from that period had been affected by such, with reformulation more obvious in products of early 1980s that show less susceptibility.  One of the most useful aspect of synthetics too, their vulnerability to high heat break down being moved substantially out of component latent heat operating range.

The chains are affected too, needing just pure oil flow through the pin/pivot sites to prevent captured oil there from passing critical temperature, the hi-vo primary an absolute copybook example of this working characteristic.

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 7508
    • View Profile
Re: Seizing horseshoes
« Reply #11 on: February 12, 2024, 10:18:56 AM »
I remember the days of  black sludge deposits all too well.
« Last Edit: February 12, 2024, 11:22:02 AM by McCabe-Thiele (Ted) »
Honda CB400NA Superdream (current money puddle)
Honda CB500 K1 (second money pit)
https://www.sohc.co.uk/index.php/topic,28541.0.html
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html
This is a neat 500 restoration in the USA.
http://forums.sohc4.net/index.php/topic,151576.msg1731556.html#msg1731556

Offline K2-K6

  • Grogu
  • *
  • Posts: 5537
    • View Profile
Re: Seizing horseshoes
« Reply #12 on: February 12, 2024, 10:53:41 AM »
Yes Ted, I've experienced it literally inches deep in chocolate fudge cake like consistency within early 70s car engine, particularly aluminium cylinder head that look to have a higher heat transfer to the oil near and around the combustion chamber "skull cap" areas.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal