SOHC.co.uk Forums > Other Bikes

CL350 carbs

(1/2) > >>

mac64:
Hi,
My CL350 needs carbs refurbished or replaced.
All the kits seem to be Chinese and David Silver only has a few genuine parts.
Any advice on where to buy genuine spares (rare I know) or where to get refurb done.
Thanks.
Mark.

Bryanj:
Unless its been buggered about with all the brass bits should be fine with a clean

AshimotoK0:
Agree with Bryan .. if original Keihin brass-ware then re-use if possible.
Also check your carb rubber diaphragms for splits.
Also check the little rubber bung that blocks one of the ports ... they sometimes go really hard.

Laverda Dave:
In addition to the above do yourself a huge favour and invest in a 2ltr ultrasonic cleaner and some carb cleaning fluid from Allendale products. A 2 litre cleaner is big enough for a single carb.

JamesH:
Welcome Mark. Let us know which year CL350 you have & post a photo if you can. Welcome to the forum. James

Navigation

[0] Message Index

[#] Next page