SOHC.co.uk Forums > CB750
David Silver supplied ignition coils
McCabe-Thiele (Ted):
On my 500 I had a similar issue with the coil feed & earth connections being too close to the frame. I made/fitted a slotted bracket between the rear original coil bracket & the frame to raise the angle enough for the insulated contacts to clear the frame.
Might be worth looking at mounting the coils facing backwards as Oddjob has posted previously - didn't work for me with my Hedler aftermarket Coils with the offset bracket fitted to my 500.
Navigation
[0] Message Index
[*] Previous page
Go to full version