SOHC.co.uk Forums > CB750

David Silver supplied ignition coils

<< < (2/2)

McCabe-Thiele (Ted):
On my 500 I had a similar  issue with the coil feed & earth connections being too close to the frame.  I made/fitted a slotted bracket between the rear original coil bracket & the frame to raise the angle enough for the insulated contacts to clear the frame.

Might be worth looking at mounting the coils facing backwards as Oddjob has posted previously - didn't work for me with my Hedler aftermarket Coils with the offset bracket fitted to my 500.

Navigation

[0] Message Index

[*] Previous page