Other Stuff > Desperately Seeking!!

CB400/4 Breather Guides

(1/1)

Laverda Dave:
Does anyone have a couple of the breather guides for sale?
These are the wire guides located on the main stand pivot tube pinch bolts. They hold the fuel breathers/overflows from the carburettors to prevent them rubbing on the chain etc.
I borrowed a clip and bought a piece of stainless steel to make a couple but admitted defeat after a couple of attempts as it became too difficult to hold, heat and bend on my home made jig.
I have tried DSS, CMSNL and 400/4 bits without any success.
Condition is unimportant as I can get them replated if I need to.
Cheers
Dave

Navigation

[0] Message Index