SOHC.co.uk Forums > CB500/550

Rear brake hub anchor bar clip 94251-08000

(1/2) > >>

McCabe-Thiele (Ted):
I am after the above clip described as an 8 mm pin in the parts book ideally in stainless.

Can anyone tell me where I might be able to source a couple of these at sensible money?

In the short term I could use a split pin - I prefer to use the original style of clip - not sure what they are an called S pin?

Bloggs:
Hi Ted,

These are known as 'R' pins.
Lots of vendors
Model Fixings do them in zinc plate  https://www.modelfixings.co.uk/r_clips.htm
Bolt World do them in STainless   https://boltworld.co.uk/product-category/fasteners/engineering-keys-and-pins/pins-clips/r-clips/?_gl=1*12jaxfs*_up*MQ..&gclid=EAIaIQobChMIo_PU6beDhgMVnqODBx22nA7lEAAYAiAAEgLXFfD_BwE

I have used both vendors and been happy with both.

Other vendors are out there....

Michael

Bryanj:
Those were originally split pins Ted but i think i fitted R clips, i have boxes of assorted ones

McCabe-Thiele (Ted):
Thanks, interestingly the download parts book shows an R clip at the hub end & a split pin at the frame end!

taysidedragon:

--- Quote from: McCabe-Thiele (Ted) on May 10, 2024, 05:03:13 PM ---Thanks, interestingly the download parts book shows an R clip at the hub end & a split pin at the frame end!

--- End quote ---

That's so you can quickly disconnect the hub end to remove wheel. No need to disturb the frame end.

Navigation

[0] Message Index

[#] Next page