Author Topic: Indicator Switch Issue  (Read 157 times)

Offline Neilw

  • SOHC Member
  • Posts: 217
    • View Profile
Indicator Switch Issue
« on: November 18, 2026, 06:09:53 PM »
It's not a big deal in the scheme of things, but it is irritating, and I'd like to find a fix.

The indicators work, but if I push the switch to its limit left or right, the indicators stay solid. If I feather it back a bit, they will flash as normal, but it's a bit fiddly to do this while riding.

I cleaned the contacts and the bar the switch travels along; it's as if it goes past a stop position, but there isn't one.

How do I fix or adjust this?

Offline Bryanj

  • Grogu
  • *
  • Posts: 12635
    • View Profile
Re: Indicator Switch Issue
« Reply #1 on: Today at 01:22:26 AM »
There is no adjustment and i can think of no reason it should happen

Offline Athame57

  • SOHC Master
  • Posts: 2112
    • View Profile
Re: Indicator Switch Issue
« Reply #2 on: Today at 07:36:51 AM »
If the switchgear is very old perhaps decades of use, especially by a heavy handed owner down the line, has worn extra travel into the housing? :-\
I brake for animals!
1978 CB400F2 named Elen.

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 8734
    • View Profile
Re: Indicator Switch Issue
« Reply #3 on: Today at 09:49:23 AM »
When you say the indicators stay solid do you mean they dont flash, are both bulbs illuminated?

I'm thinking this sounds like a bad earth, I've had issues with new bulbs being faulty in the past.

If both the front & rear indicators are on but not flashing, sounds like an earthing issue on the lamps or indicator circuit. Moving the switch back slightly might be creating a back EMF, this rise in voltage could then cause the poor earth to work.

The original earth's are imho less than perfect over time. I fitted earth wires from the bulb holders to ground in pretty much all of my bikes. Corroded bulb holders will also cause poor bulb earthing.

I can't remember how the bar switch circuit works, I would check  all the earths in the indicator wiring circuit including the flasher unit eart if there is one on your bike.
« Last Edit: Today at 07:33:28 PM by McCabe-Thiele (Ted) »
Honda CB400NA Superdream (current money puddle)
Honda CB500 K1 (second money pit)
https://www.sohc.co.uk/index.php/topic,28541.0.html
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html
This is a neat 500 restoration in the USA.
http://forums.sohc4.net/index.php/topic,151576.msg1731556.html#msg1731556