Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
You could buy a small piece of Aluminium plate [ebay] and just bolt it betweenthe rear frame tubes. You would probably have to put a slight bend in it for tyre clearancebut that is easy enough with alloy.I was originally going to relocate the battery on mine but trying to fit a full size batteryand all the electrics in a small seat hump seemed to need alot of compromises. As you can seefrom my Avatar i ended up fitting alloy side panels. A new seat would be a better option so you can experiment without damaging you present seat.
No they are NOT, according to the parts list, there are 20 Type "A", and 20 Type "B", the difference is very slight, but they are different
Okay,just checked with DSS website, Spoke "A" is 203mm long, and goes on the inside of the hub, Spoke B is 202.5mm long, and goes on the outside of the hub, hope this helps