SOHC.co.uk Forums > CB750
750F1 axle holder
(1/1)
kifer:
The axle holder [ clamp ] is marked with the letter F on my F1, Dose this mean anything ? can they be fitted either way around.
Cheers in advance.
Spitfire:
The clamps are "stepped", the F mark should be at the front, the gap at the back, tighten up the front bolt first then the back one.
Cheers
Den
kifer:
Thanks for that, Old age is catching up remember now step at back to form the clamp, Maybe bike should go I could buy some lego
Navigation
[0] Message Index
Go to full version