Author Topic: posable disaster with my 650 (Read 8668 times)

LesterPiglet · « **Reply #15 on:** December 01, 2013, 05:22:04 PM »

Check for pistons too.

Bitsa (Ralph Wright - RIP) · « **Reply #16 on:** December 01, 2013, 07:19:23 PM »

plus 1
cheers
bitsa

RickyC83 · « **Reply #17 on:** December 07, 2013, 06:57:08 PM »

So all my inlet valves are bent. Got a spear engine so was thinking I wuld take them out of that an grinned them in?

LesterPiglet · « **Reply #18 on:** December 07, 2013, 09:39:30 PM »

Or just swap heads.

RickyC83 · « **Reply #19 on:** December 07, 2013, 09:41:18 PM »

The head is damaged on the other engine it has several snaped rocker cover bolts and a few with no threads. One if reasons a got the second engine.

LesterPiglet · « **Reply #20 on:** December 07, 2013, 09:44:18 PM »

Go with the valve change then. Have you done it before? The valve lapping I mean.

RickyC83 · « **Reply #21 on:** December 07, 2013, 09:54:52 PM »

No but my dad has a few times on his norton commando. So think I should be ok. But any tips a always welcome

LesterPiglet · « **Reply #22 on:** December 07, 2013, 10:16:20 PM »

The only tip I have is don't use an electric drill. Use the traditional hand tool. There is no time to be saved by going electric.

RickyC83 · « **Reply #23 on:** December 07, 2013, 10:17:45 PM »

Thanks

LesterPiglet · « **Reply #24 on:** December 07, 2013, 10:23:16 PM »

I stayed in Scunthorpe for a weekend in the 70's. The only thing I remember was the stripper in the working mens club.

RickyC83 · « **Reply #25 on:** December 07, 2013, 10:24:40 PM »

Lol it's probably not changed much.

LesterPiglet · « **Reply #26 on:** December 07, 2013, 10:54:44 PM »

Hehhe, I was 15.

RickyC83 · « **Reply #27 on:** December 07, 2013, 10:56:01 PM »

Then that striper must if been GRATE lol

LesterPiglet · « **Reply #28 on:** December 07, 2013, 10:56:48 PM »

FFs I'd never seen a tit before.

RickyC83 · « **Reply #29 on:** December 07, 2013, 11:26:41 PM »

Honda-SOHC