Author Topic: CB500F ENGINE PAINT  (Read 5824 times)

triton

  • Guest
CB500F ENGINE PAINT
« on: August 08, 2006, 09:14:00 PM »
I am in the process of restoring my 1972 Honda CB500F and I need to repaint the engine crankcases, barrels and cylinder head.

Can anybody please tell me what vht paint and primerto use that matches the factory coulour and finish (that lasts).

Cheers

Mark

Offline SteveD CB500K0

  • Administrator
  • SOHC Jedi
  • Posts: 4442
  • Ride on the Steel Breeze...
    • View Profile
    • Steve's Blog
Re:CB500F ENGINE PAINT
« Reply #1 on: August 09, 2006, 10:49:37 AM »
Hello Mark.  I have a 1972 500/4 as well (and I had one in 1972!)  I don't think the cases were painted on these bikes. Just laquered.  Later models were painted however (400/4) and so I'm sure that you can get paint to match.  I used Sperex VHT 1200 on my 500 in the 70's (but I used red and black - it was the 70's afterall!)  The Sperex had to be baked on (in the oven!) but proved resistant to fuel, oil, brake fluid, heat and everything else.  Unfortunately the bike did not prove so durable and expired in 1979 with 50k+ miles on the clock.

Steve

Post edited by: SteveD CB500F, at: 2006/08/10 14:42
2022 Tiger Sport 660
1971 CB500K0

triton

  • Guest
Re:CB500F ENGINE PAINT
« Reply #2 on: August 09, 2006, 06:42:17 PM »
Thanks for that Steve,

It will now be laquered.

I also have a 1975 model in my garage, I wonder if that one was painted.

Cheers

Mark

Gloucester

Offline SteveD CB500K0

  • Administrator
  • SOHC Jedi
  • Posts: 4442
  • Ride on the Steel Breeze...
    • View Profile
    • Steve's Blog
Re:CB500F ENGINE PAINT
« Reply #3 on: August 10, 2006, 02:43:07 PM »
Gloucester's not too far.

Do your bikes run?
2022 Tiger Sport 660
1971 CB500K0

triton

  • Guest
Re:CB500F ENGINE PAINT
« Reply #4 on: August 10, 2006, 05:28:07 PM »
The 75 Model is 100% ready to run, just replaced head gasket and clutch.

How far away are you away, we have 6 bikes in the garage fully restored 1930 to 1975, and ready to ride.

Always looking for a reason to stretch their legs

Mark

07903 957 188

jimshea

  • Guest
Re:CB500F ENGINE PAINT
« Reply #5 on: August 11, 2006, 07:00:20 AM »
Mark,
Welcome. Do you know Bryan Jones from Gloucester, he is a Honda expert.
Btw, Steve and I live near each other, near Bracknell.
Jim.

Offline JonnyB

  • SOHC Pro
  • Posts: 546
  • Repeat: It's only a Hobby, It's only a Hobby....
    • View Profile
    • BatchScan
Re:CB500F ENGINE PAINT
« Reply #6 on: August 11, 2006, 12:35:24 PM »
Mark

Send me some pictures, and a little description like model and I'll put them in the gallery, send to gallery@honda-sohc.co.uk

Wecome to the site.
Regards and Ride Safe!!

Daily Ride - BMW K1200GT
Summer Fun - Naked K100
Current Project - GS500E
Basket Case -  K100/1200 hybrid 
Lawnmower - 1965 Webb Delux 14" Close Cut Battery Electric.

John

https://batchscan.co.uk/

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal