Honda enthusiast now starting a small business supplying parts

[stuartni]

Well as some of you may know after building my cb550 cafe racer and having trouble sourcing certain parts, i always planned to try and start my own small business on the side doing a range of parts for the our beloved cbs. Below will be a rough list of the parts i either have in stock and parts i hope to have in stock soon. If theres anything you after i can certainly check and see if its something i can supply.

Here is the rough list with what photos i have so far most items will be on ebay and hopefully soon my website

£9.99 Rev cable blanking plugs cb450 500t cb500 cb550 and cb750

£14.99 Alloy starter motor delete plugs to fit CB350 Twins (68-72)  CB350G (73)  CL350 (68-73)  SL350 (69-70)  CB360 (74)  CB360G (74)
CB360T (75-76)  CL360 (74-75)  CB450 (68-74)  CL450 (68-74)  CB500T (75-76)

£129.99 cb750 k fork tubes

£29.99 cb550 fuel taps petcocks

£19.99 cb brake rods 470mm long direct replacement

£19.99 cb brake rods 490mm long designed for fitting to aftermarket rear sets etc

£2.70 cb side panel rubbers

£2.70 cb ignition switches

£3.40 EACH tappet covers to fit c50 c70 c90 cb400 cb500 cb550

£11.99 oil pressure switch to fit cb400 cb500 cb550 and cb750
 
I can also get a range of forsa enterprise rear shocks. According to a lot of fellas on the american forum seem to highly rate them. I have only order one set for my cb550 to test them out


excuse some of the photo the quality isn't great better photos to come




This is an alloy adaptor for 70s/80s bmw r70 r80 r100s to convert the speedo drive to fit standard (same as honda clocks) speedos

[stuartni]

As said i will do my best to add addition better photos of all the items to be available including a full range of main jets, led indicator relays, horns, handlebars, levers,piston kits cables.

Please feel free to contact me with questions and prices i will do my best to add as many pictures and details to any item i will be selling.

[mick]

Good luck to you with your new venture  , hope it takes off i'll keep checking in see if there's anything I need  cheers Mick.

[Green1]

Good luck
I have chrome Forsa shocks on my 750 they've been on there for about 2-3 years now only polished them twice as I don't like cleaning and there looking as good as new but more importantly there so much better than the originals.They are rather stiff so I recommend leaving them on the softest setting.   

I could do with enough side panel grommets for two bikes.
Are the 750 fork tubes just for the later K's?

Mick

[matthewmosse]

What is the price of a brake rod for stock bikes? might be after a spare for my cb500 as mine snapped and i have yet to check the spares stock.

[BigAl (Alan)]

Good luck with the new venture, lets us know the name of the web site when its up and running

Alan

[Bitsa (Ralph Wright - RIP)]

Like all said will watch and see
Cheers
Bitsa

[stuartni]

Good luck
I have chrome Forsa shocks on my 750 they've been on there for about 2-3 years now only polished them twice as I don't like cleaning and there looking as good as new but more importantly there so much better than the originals.They are rather stiff so I recommend leaving them on the softest setting.   

I could do with enough side panel grommets for two bikes.
Are the 750 fork tubes just for the later K's?

Mick

I Will double check with my supplier in the morning and get back to you

[stuartni]

Green1 how many of each grommet type would you like and I installed my forsa shocks tonight so hopefully get to test them out over the weekend a lot of people have said good things about them.

Thanks everyone for the great comments I hope it goes well and I can keep expanding the stock range.

[Trigger]

You are listing products without any prices

[stuartni]

You are listing products without any prices

Yes sorry i did do this intentionally incase it looked as if i trying to have a for sale thread in the Announcements section of the site however i shall add prices and should there be an issue i will address it.

[SteveD CB500K0]

I have no problem with you selling via the site Stuart, .net do it all the time (eg Hondaman)

I'll PM you the "terms" and we should think about where such a section should go.

Steve

[stuartni]

I have no problem with you selling via the site Stuart, .net do it all the time (eg Hondaman)

I'll PM you the "terms" and we should think about where such a section should go.

Steve

That would be great thanks

[RoytheBoy]

Hi, just joined the forum as now the owner of a CB750 K7 & picked up on this thread......will need parts but are you still selling them? here? via a website (couldn't find it)?

thanks