Exhaust Clamps

[csd4t]

Ey up
I presume that the clamps should be tapped 8mm left and right handed and not drilled clear with a nut and bolt through (looks like this from the parts list), I have helicoils at my disposal!!!

[steff750]

  yes  but you can use a nut and bolt if need be

[Bryanj]

Which clamps on what bike mate

[csd4t]

750K2 finned clamps to manifold. I think they should be tapped with an M8x32 hex head by the look of the parts list.

[Trigger]

Yes, they should be threaded and use a 8x32 mm bolt.

[csd4t]

Thanks. thought so, I'll dig out the helicoils then, should be a bit neater.