f2cafe racer

[SteveD CB500K0]

I'll do it. But currently in back garden listening to Monaco GP on my phone. 
Can't move threads from my phone.


Sent from my iPhone using Tapatalk

[yozzer74]

Ok cheers

[yozzer74]

Finally got my head back .valve guides fitted& head skimmed &seaats recut & lapped .but one of the exhaust valves is bent .so need to find one from some were .also got my yoke back from being welded up after cutting the bar mounts off.

[UK Pete]

i might have a second hand valve, i will take a look monday when i am home if you want, might need to remind me
pete

[yozzer74]

Ok cheers Pete will do

[yozzer74]

Drilled my disc think holes need to be bigger or some more drilling

[MarkCR750]

It's a matter of personal preference, I would wait until it's fitted to the finished bike and see how it looks, it's easy to put more holes in but much harder to take them out again!😀

[yozzer74]

Yeah I think your right

[mike the bike]

Unless you've got an adding -on bit

[yozzer74]

What do you mean adding on bit

[MarkCR750]

Is that what the reverse function on my cordless drill is for?

[yozzer74]

Hi Pete did you manage to find a spare valve .cheers .

[yozzer74]

Few more bits back took some pics in Sun to see how they would pop with metal flake in them .I've been buying titanium race bolts just a few at a time got nearly all of the engine brackets bolts chain guard and the break calipers yokes break arm bolts not many more to get now thank God.I'm not doing it for weight savings .I just like the look of them

[yozzer74]

Also got a new rear master cylinder off a Ducati panagali hope it works ??

[yozzer74]

Been cleaning engine parts today noticed this on bottom of barrels it's quite deep anyone got any ideas what has caused it and will it be ok.and how I can stop it .thanks