Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
I reckon they may only offer the big bore kit, as lots of variants to consider as the 400 in japan was just under 400cc and Europe & USA was 408cc.Ash
So what size would these standard rings be ?Good question... I'd assume that they're to fit a standard 51mm piston.I need 51.5 mm pistons and rings, however I do have another option..I could ask SEP to make and fit new liners, then rebore to std size, then re-use my std Honda pistons with new rings.Swings and roundabouts really, save on new pistons but pay for new liners ?Steve
I'm ressurecting this thread because I've acquired a set of oversize pistons, or at least I'm led to believe that they're oversize. I have no vernier gauges or the like to measure them but the guy recons they are 51.5mm when he measured them. They are genuine Honda but looking on the crown, I can see no oversize markings anywhere to show the size, are they ALWAYS marked with an oversize ?My bores are STD at the moment but need a .50mm rebore and these pistons slip into the bores now. Surely they should be too large to fit ?Maybe a stupid question but I'd appreciate some helpThanksSteve