31
CB350/400 / Re: Silicon rectifier
« on: July 15, 2021, 09:21:42 PM »
Hi Bryan
Dark green/red from solenoid to diode has continuity as does the same wire from the diode to the clutch switch Also the light green/red from the other side of the diode to the neutral light
If you look at the photos 1&2 show old loom where positive dark green /red goes to negative through the diode which i believe is correct
Photos 3&4 shows the new loom dark green/red positive goes to negative through the diode in the opposite direction according to the illustration on the diode which i believe it cannot
Do you think if i changed the wire positions at the plug around to suit the diode direction Things might work !! Ross
Dark green/red from solenoid to diode has continuity as does the same wire from the diode to the clutch switch Also the light green/red from the other side of the diode to the neutral light
If you look at the photos 1&2 show old loom where positive dark green /red goes to negative through the diode which i believe is correct
Photos 3&4 shows the new loom dark green/red positive goes to negative through the diode in the opposite direction according to the illustration on the diode which i believe it cannot
Do you think if i changed the wire positions at the plug around to suit the diode direction Things might work !! Ross