Honda-SOHC
SOHC.co.uk Forums => Recommended Sources for Parts and Services => Topic started by: alexojones on June 26, 2018, 07:20:52 PM
-
Hi All
Apologies is the answer is already on the site I couldn’t find it.
I’m trying to replace my handle bars and bolts for ignition points cover.I’ve got a CB750K 1978 import.I live in UK Worcestershire.
A gravelly skid hurt my pride and a lot of chrome work ...
David Silver has sorted me for most things.Ive tried about 8 bike shops and two failed purchases on eBay! ( yes I’ve tried giving them the measurements , lost in translation I guess)
I’m looking for bars with a 4in rise or ideally a bit less that I don’t have to change cable set up with.
Thanks
Alex
I
Sent from my iPhone using Tapatalk
-
I’ve got engine street bike handlebars which have a 3.5inch rise, if you want to go lower then the sport bike ones are 2.5inch rise I think
-
Hi All
Apologies is the answer is already on the site I couldn’t find it.
I’m trying to replace my handle bars and bolts for ignition points cover.I’ve got a CB750K 1978 import.I live in UK Worcestershire.
A gravelly skid hurt my pride and a lot of chrome work ...
David Silver has sorted me for most things.Ive tried about 8 bike shops and two failed purchases on eBay! ( yes I’ve tried giving them the measurements , lost in translation I guess)
I’m looking for bars with a 4in rise or ideally a bit less that I don’t have to change cable set up with.
Thanks
Alex
I
Sent from my iPhone using Tapatalk
Are these any good?
https://www.ebay.co.uk/itm/NEW-HONDA-CB750-CB-750-K-69-78-HANDLEBARS-REPRODUCTION-4-5-RISE-/301059194852?hash=item461886bfe4
-
Dont know if the bars are suitable... but i can vouch for bertrum from Hull, he’s a nice guy and rides a 400 four..... 8)