Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: ricardo on May 29, 2019, 05:33:00 PM
-
Hello again.
I'm preparing to replace the front wheel bearings. One of the workshop manuals says pack the bearings AND the hub with grease.
The ones I removed seem to be sealed and filling the hub with grease will take an hour. Also there was no grease in the hub when I took it apart.
Ricardo
-
I used to remove the inward facing seal on wheel bearings and 1/2 pack the centre section with grease, double sided seals on bearings can mean they are only oiled
-
Just use good quality bearings NTN 6302 2RS ;)
-
thanks bikers
-
If you use aa good quality double sealed bearing you can just fit them as they are and leave the hub cavity dry.
-
ok