Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - paulbaker1954

Pages: [1] 2 3 ... 47
1
CB500/550 / Im a diesel idiot !!!!
« on: May 06, 2024, 06:13:53 PM »
Went to fill up with 99 juice at end of a run today, tank just on reserve and stupidly got the pumps muddled up and put about a litre of high spec diesel in.

Quickly realise my error and stopped and filled up with 99 E5

Stemmed to run fine on the 10 miles home

Guess it just got well diluted

Lesson learned 😂😂😂

2
Out & About / Re: Crich Tramway CLASSIC MOTORCYCLE DAY... 2024
« on: May 05, 2024, 12:51:30 PM »
if you could julie got my number today 64 can't print it off like last year iv'e printed the  i will miss not seeing you and trig

Julie I am 349

3
Out & About / Re: Crich in July
« on: May 03, 2024, 04:13:20 PM »
Hi Julie
Be great if you could organise us 4s an area

I am number 349

4
Member 4 Sales / 500 Four Crash Bar available
« on: May 03, 2024, 12:57:20 PM »
I have an original four crash bar. It needs rechroming but overall in good nick

Anyone interested before i shove it on fleabay

5
Out & About / Crich in July
« on: May 03, 2024, 12:53:08 PM »
Hi
I just booked for Crich in July can I assume there will be an SOHC area?

How do I notify them I want to be in that area?

Cheers

6
Other Bikes / Re: White Diamond metal polish
« on: July 21, 2023, 06:15:33 PM »
Well folks
Used some and it’s very good on alloy cases, brings them up way better than solvol and apparently it seals as well so less often polishing

Expensive but very good and goes a long way

Would recommend

7
Other Bikes / White Diamond metal polish
« on: July 14, 2023, 05:43:27 PM »
Anyone ever used, read it's the dogs b*******

8
Bugger missed it !!!   :( :( :(

See you all next year

9
CB500/550 / Exhaust joint refurb
« on: May 27, 2023, 09:00:40 AM »
My exhaust flange thingys are somewhat rusty and tatty

What’s best option to refurb them, paint, plate ???

Pic is for reference not one of mine [ Guests cannot view attachments ]


10
I always use Inox in Southampton

http://www.inoxbolt.co.uk/zen/

Good quality and service

I am not a purist and replaced my JIS with socket cap screws as I just prefer them

11
Member 4 Sales / 500 Rev counter for sale
« on: January 26, 2023, 08:08:40 AM »
I have a rev counter spare I am selling, it’s the 500 one with the non angled cable entry.

Thought I’d see if any members were interested before I eBay it

Pm me an offer if interested

12
CB500/550 / Re: DS full aftermarket exhuast system for the 500
« on: January 08, 2023, 10:16:55 AM »
Seconded for CMS
I got mine ftom there and they fitted well
Only issue was i had to mod the main stand bump stop slightly as it didn't line up but it was an easy mod

13
CB500/550 / Re: 500 Brake pad options wanted.
« on: October 17, 2022, 08:52:25 AM »
I have always used EBC on my bike and they always work well.  They have a tendency to squeal but that's when I know they are correctly adjusted.  The brake on these bikes is rather primitive but is more effective than it 'feels'.

I used EBC pads in an attempt to stop the squeal from my front brake and it didn’t help. But I saw a recent post talking about chamfering the edges of the pads which I did and squeal seems to have gone. I have no idea why this happens!!!!

14
CB500/550 / Re: Cam Sprocket to Cam Shaft
« on: October 17, 2022, 08:26:38 AM »
Make sure you have the front tensioner the right way round. I had mine the wrong way and exactly the same problem. Also make sure you are inserting the cam from the rights hand side

15
CB500/550 / Re: Rear Swing Arm play
« on: October 13, 2022, 05:46:31 PM »
All sorted and back together now

Thanks to Julie for the bushes and John Oldfield for the collar (ouch at £95)

Old ones came out with sheer brute force and Julies went in quite easily after sitting in freezer but still needed a few whacks with my lump hammer.

Pages: [1] 2 3 ... 47
SimplePortal 2.3.5 © 2008-2012, SimplePortal