This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - boilermaker1
1
« on: July 22, 2021, 09:02:00 PM »
I took my 400f for a long drive today, bike ran great. When I got home I turned off bike for a minute and when I went to restart it. Battery was nearly fully dead, had to start bike with kick started. Battery is only a few months old gel type. Any suggestions on why battery drained? where do I start checking?
2
« on: May 09, 2020, 05:56:01 PM »
Took my 400 out for a spin today.. For some reason it is bogging down when the revs hit 5000 , and will not rev above 5000.. Bike is been used regularly and ran fine a few days ago..Fuel is fresh. Where should I start looking for the problem???
3
« on: April 17, 2019, 12:21:18 PM »
I am looking for a good up close photo of the points plate of a 400F I need to see which way the harness that connects to the points plate is fitted Thanks
4
« on: December 28, 2018, 06:52:52 PM »
I spotted a 1975 500 K1 for sale Bike is running but rough looking Seems to be all there except for exhausts Its fitted with some kind of home made looking 4 into 2 system. And the seat on it does not look original. So the go question.. How hard to get parts and what to look out For when viewing the bike? Thanks
5
« on: September 08, 2018, 12:44:33 PM »
Manager to get a 400/ 4 original header in good shape but it is missing the 2 detachable down pipes. Has anyone got these 2 pipes for sale..
Thanks
6
« on: July 05, 2018, 10:33:43 PM »
Can any tell me the correct routing of the breather pipe That goes from the rocker cover to the bottom of the air filter on a 400 4 Thanks
7
« on: June 27, 2018, 11:19:23 PM »
I fitted brake light to my (US) 400 f today One filament of the bulb is on all the time But pressing either brake does not light the Other filament ... Both brake switchs appear to be working,, I checked the switches with a continuity meter,, where do I start trying to sort this???
8
« on: August 26, 2017, 05:43:55 PM »
Hi, My 400 F has a knocking sound from the clutch so I have taking the clutch apart to try and find what is causing this. All I can find is that there is slop between the gear on the back of the clutch outer. I can rock the gear approx 2mm back and fort without the front of the outer clutch moving Is this normal? Do I need to replace?
Thanks
9
« on: July 26, 2017, 04:51:04 PM »
Hi, I know this came up recently on this forum but I can not find the post. Any one got pictures or hints on how to fit the spring on the rear brake pedal? Thanks
10
« on: July 20, 2017, 11:40:33 PM »
Hi all I have some very mild patches of rust on the inside of my petrol tank. What is the best cure for this ? Thanks in advance
11
« on: June 17, 2017, 04:37:37 PM »
Quick question. Finishing a 400/4 build that's being going on for years. What is the best brake fluid to use?
12
« on: May 11, 2017, 08:40:05 PM »
Hi, I have some 400 4 parts I want to get replated. axles, bolts etc What is the best method for cleaning up these parts?? Any advise would be great
13
« on: December 04, 2016, 02:14:17 PM »
Hi, I am hoping to get my new wheel bearing fitted this week. One question, which way round does the front wheel bearing spacer go in? Thanks
14
« on: June 19, 2016, 10:20:49 PM »
I am getting my wheels refurbished and have some questions. I am thinking of having hubs & lower fork legs polished. Were hubs originally painted? if painted best way of removing paint? have heard of clear coat been used on polished parts What type do I need, and what prep work is needed before painting? Any help would be great Thanks
15
« on: December 16, 2014, 03:29:14 PM »
Hello, some help needed again. I want to get my 400f gear linkage rechomed. So it looks like the one in the photo. I imagine I need to take it apart to get this done. How do I take it apart??
Thanks
|