Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: alexdecker on September 07, 2021, 05:35:29 PM
-
Hey all
I can't find this part, where the side mirror screws into anywhere? My thread is completely stripped, so wanted to get a new part if possible. Anybody knows what it's called?
- Alex
(https://i.imgur.com/I39NW0a.jpg)
-
Its part of the lower L/H switch gear assembly
Best wishes Al
Sent from my iPhone using Tapatalk
-
It can be helicoiled if the correct pitch is available
-
I think its m10 x1.5 from memory so easy enough to get helicoil that size if my memory is correct.
-
Thanks for the help! I think I will try and source and original part. Those extenders, helpful as they would be, are rather unsightly :) I really appreciate the help and links though!
- Alex
-
Look at breaking point in Scotland, they had some switchgears for sale on Ebay in job lots, I picked up a few spares off there recently. I incidentally found I've had the 'wrong' swichgear on the left of my bike for years, keeping it though, the correct ones a bit more square and chunky looking than mine, which looks rather more like a mirror image of the 'correct' right switchgear. I did get offered a cb550 left switchgear via my mate the other day from a guy in Portsmouth I could find out more. He was picking up a top yoke for his cb350.
-
Hi, Alex.
As promised, mirror dimensions.
-
Hi, Alex.
As promised, mirror dimensions.
This is amazing, thank you for that!
-
You are very welcome. Great source of info and help this site.
-
I have found several sellers on eBay selling this part, but they all state the part is for different models. Sometimes its for the K1. Othertimes the K2 og K3.
I have the CB550 F2 1978.
Did the switch signal switch for the CB550 change at all during all the models, or can I use one from the K1 on the F2?
- Alex
-
Check the part number at cmsnl
-
Does that speedo really read over 79k kilometers?
-
Yeah - its not the original though :)
-
K3 switch is for external wiring and not within bars. European models had a PA, but don't think US models had it.
Does the F wiring go to the box under tank (can't remember) in which case it will be longer?