Honda-SOHC

SOHC.co.uk Forums => SOHC Singles & Twins => Topic started by: AndyD on February 07, 2024, 06:00:15 PM

Title: ATU springs
Post by: AndyD on February 07, 2024, 06:00:15 PM

Hi,
Looking to do a bit of fettling on the CJ360t and one thing I  didn't sort last year was the springs on the ATU which were quite rusty and weak.

I've been keeping an eye out for a better unit but no luck so far.

From some random googling I did find a site selling new springs for the CB400 - 750 range and I wondered if anyone knew if these would be any good for the CJ.

Cheers,
Andy

Title: Re: ATU springs
Post by: Bryanj on February 07, 2024, 09:31:04 PM

Will probably fit but advance curve may differ, doubt it will be worse than what you have

Title: Re: ATU springs
Post by: AndyD on February 16, 2024, 06:05:46 PM

Thanks Bryan,
I might give them a go as the old ones are pretty crusty and the movement isn't smooth at all.

Cheers,
Andy