Honda-SOHC
SOHC.co.uk Forums => SOHC Singles & Twins => Topic started by: AndyD on February 07, 2024, 06:00:15 PM
-
Hi,
Looking to do a bit of fettling on the CJ360t and one thing I didn't sort last year was the springs on the ATU which were quite rusty and weak.
I've been keeping an eye out for a better unit but no luck so far.
From some random googling I did find a site selling new springs for the CB400 - 750 range and I wondered if anyone knew if these would be any good for the CJ.
Cheers,
Andy
-
Will probably fit but advance curve may differ, doubt it will be worse than what you have
-
Thanks Bryan,
I might give them a go as the old ones are pretty crusty and the movement isn't smooth at all.
Cheers,
Andy