Honda-SOHC

Other Stuff => Desperately Seeking!! => Topic started by: Matt_Harrington on May 15, 2023, 10:22:27 AM

Title: Points cable clips (cramper!)
Post by: Matt_Harrington on May 15, 2023, 10:22:27 AM

I'm missing the cable clips for my points cable. Anyone got the pair (to sell) that go on the engine OR an outline of them so I can fabricate a couple?
I think the parts used to be: 32117-371-000 & 32112-333-000

Title: Re: Points cable clips (cramper!)
Post by: Laverdaroo on May 15, 2023, 11:23:22 AM

Got a piccy Matt, cant find any images on line and I might have something in my  parts drawers that came off during the strip down......

Title: Re: Points cable clips (cramper!)
Post by: Matt_Harrington on May 15, 2023, 11:48:42 AM

The one near to the points cover is different but this is the one further up. I haven't got a picture of the other  :'(
[attach=1]

Title: Re: Points cable clips (cramper!)
Post by: Matt_Harrington on May 15, 2023, 12:18:27 PM

And this, I think is the other clip....
[attach=1]

Title: Re: Points cable clips (cramper!)
Post by: McCabe-Thiele (Ted) on May 15, 2023, 12:25:22 PM

If you fail to find something suitable most trade electrical sellers have stuff like this - there are wider & longer  ones that you can drill out.
I would have thought other models would have something that works - my old lawn mower had something similar.

https://www.ebay.co.uk/itm/134570778114?hash=item1f550b1e02:g:NRAAAOSw~T9jvX33&amdata=enc%3AAQAIAAAA4NpcCWEnWdZWpH6cgSFdxVQNLQeWoyCPoSPQL9WgwvjVwpaG6EgbbRf52WgFZZGcrbv8c80ktFjrxLsUrad0%2FEdGhrfczCupjXPgnzSKUKUxqU3EWejRyUuczXXJBfpvgqfJoHF8bp7T1v%2F1gb0MJW2VVM3dMg6G9ptsM393jVS52VUE4sPJze6ESmUZMx%2F5%2BEGFqi5hxfKHDkNARhyAEmUkq4u9ZuA5TN2w8Osg2GkhqozzLT3ncJz68achh6PExNhS5JeCA0apatWGuv0jii5cJVj5jPtFi8FmgT37GsLn%7Ctkp%3ABk9SR_aJ6fGDYg

Title: Re: Points cable clips (cramper!)
Post by: Bryanj on May 15, 2023, 01:20:48 PM

Try looking at 32111323000
They have a plastic coating to protect cable.
Should be available from any Honda dealer but about £4 each

Title: Re: Points cable clips (cramper!)
Post by: Laverdaroo on May 15, 2023, 02:51:25 PM

Matt I just cut some from some galv sheet, prepped and painted them and bobbed a bit of shrink tube over the top to protect the wire. Cost pence and you can’t tell the difference unless you were looking out for it…..


Sent from my iPhone using Tapatalk

Title: Re: Points cable clips (cramper!)
Post by: Matt_Harrington on May 15, 2023, 02:58:16 PM

Roo, that is what I was thinking of. However, you know me and the stainless sheet will be coming out!!  ;)
Just realised that there maybe the clips on the engine from Tim, will look a bit later.....

Title: Re: Points cable clips (cramper!)
Post by: Laverdaroo on May 15, 2023, 03:00:44 PM

That’s a good shout…..I’m sure there’ll be some to poach off that…..

I didn’t have any stainless and only galv guttering that I cut up

Works a treat


Sent from my iPhone using Tapatalk

Title: Re: Points cable clips (cramper!)
Post by: sye on May 15, 2023, 03:03:15 PM

Rubber lined stainless P-clips?

Title: Re: Points cable clips (cramper!)
Post by: Laverdaroo on May 15, 2023, 03:05:38 PM

No there like a flat tang which the bolt goes through and then you bend to suit over the cable.


Sent from my iPhone using Tapatalk

Title: Re: Points cable clips (cramper!)
Post by: Oddjob on May 15, 2023, 04:39:37 PM

I'm making some out of a sheet of stainless steel, cut to shape, round the ends off after punching the 6mm hole through then using some glue lined shrink wrap tubing to line the steel. I made one the other day for a fuel pipe clip on a bank of carbs, turned out rather well considering it was a first attempt.