1
Anorak's Corner / Anyone used ABS Slurry to fix side panels etc
« on: May 11, 2024, 09:28:38 AM »
Someone on the CB250RS Facebook closed group suggested I try ABS slurry to fix cracks and broken mounting lugs on plastic side panels etc.
I thought back to the 90's, when I couldn't buy the correct angle guttering joints for my 1030's house and some old sage where I was working at the time (who had an immaculate BSA Gold Flash Combo) cut a section out of one to reduce the angle and bonded it back together at my required angle with a paste made up out of the waste material dissolved in MEK. They bonded beautifully and are still on my old house when I went past earlier this year.
Has anyone tried this? I guess the panel materials will have changed over the years. I think the 250RS panels are ABS but I seem to remember my 750K0 panels and airbox were made from some form of styrene. But I guess the theory is the same... dissolve a piece of the same material in a suitable solvent and use that to repair the panel.
This what the FB guy said: Quote : "Google abs slurry,,, and make some .... glue it on with it ,then build it up round the crack ( takes a day or two to fully cure) permanent fix ... I glued 2 halves of a panel together with it .... you could bend it as much as the parent material , it doesn't glue, it bonds. I have tried epoxy, fibreglass glues, nothing does it like abs slurry"
https://www.matterhackers.com/news/how-to-make-abs-juice-glue-and-slurry
I thought back to the 90's, when I couldn't buy the correct angle guttering joints for my 1030's house and some old sage where I was working at the time (who had an immaculate BSA Gold Flash Combo) cut a section out of one to reduce the angle and bonded it back together at my required angle with a paste made up out of the waste material dissolved in MEK. They bonded beautifully and are still on my old house when I went past earlier this year.
Has anyone tried this? I guess the panel materials will have changed over the years. I think the 250RS panels are ABS but I seem to remember my 750K0 panels and airbox were made from some form of styrene. But I guess the theory is the same... dissolve a piece of the same material in a suitable solvent and use that to repair the panel.
This what the FB guy said: Quote : "Google abs slurry,,, and make some .... glue it on with it ,then build it up round the crack ( takes a day or two to fully cure) permanent fix ... I glued 2 halves of a panel together with it .... you could bend it as much as the parent material , it doesn't glue, it bonds. I have tried epoxy, fibreglass glues, nothing does it like abs slurry"
https://www.matterhackers.com/news/how-to-make-abs-juice-glue-and-slurry