Recent Posts

Pages: 1 ... 7 8 [9] 10
81
CB500/550 / Re: Honda man ignition
« Last post by rmii on May 14, 2024, 02:37:06 PM »
Hello hello!

I use it. It is a very robust box, simple installation and efficient. (recommended by Roo o/)
I will keep doing the timing adjustment as I've learned to like it.

Do you have any doubts about the need or setup?
82
CB500/550 / Re: top end gasket set recomendations
« Last post by Bryanj on May 14, 2024, 02:05:52 PM »
Its not the head you need to skim but the barrel so as to reduce the depth of the recess for O ring by 3 to 5 thou.
I did once think aboutputting a small shim in the recess but getting an accurate sized shim that thin did not appear easy
83
CB500/550 / Re: Relocating or alternative to ignition switch
« Last post by Bryanj on May 14, 2024, 02:02:42 PM »
What actual model is it and where is the ignition switch now?
84
CB500/550 / Re: Relocating or alternative to ignition switch
« Last post by Laverdaroo on May 14, 2024, 01:25:33 PM »
More than likely, cue Bryan, Ash, Ken; Oo, sorry

Isn’t there a link on the classic octane site for a slot into the loom 4 way key barrel, I’m sure there is but you may need to list the videos and go to the links on each one to see but I’m sure there’s a link, maybe a hamazon link.


Sent from my iPhone using Tapatalk
85
CB500/550 / Re: top end gasket set recomendations
« Last post by paulbaker1954 on May 14, 2024, 12:38:03 PM »
I went through a nightmare around DS aftermarket gasket set tring to fix an oil leak.

 I ended up using the aftermarket O rings along with a proper Honda OEM gasket plus having head skimmed.

As many have said the relative thickness of head gasket and O rings is critical to getting a oil tight seal.

86
CB500/550 / Re: Relocating or alternative to ignition switch
« Last post by DomP on May 14, 2024, 11:16:07 AM »
Yeah Motogadget was just a step toofar financially for me, I keep thinking 'cheap build remember, cheap build'  🤣

I'm sure an electrical genius will answer my query
87
CB500/550 / Re: Relocating or alternative to ignition switch
« Last post by Laverdaroo on May 14, 2024, 08:52:26 AM »
I’ve the Motogadget Dom as you know but  that’s what straight onto mine.


Sent from my iPhone using Tapatalk
88
CB500/550 / Re: Relocating or alternative to ignition switch
« Last post by DomP on May 14, 2024, 08:16:26 AM »
Looking at the wiring diagrams I seems the 4 wire switch has two browns linked into one, I wonder if its as simple as doing that?
89
SOHC Singles & Twins / Re: My first project - 1974 CB360 K0
« Last post by Craizeehair on May 14, 2024, 07:15:44 AM »
Thank you, re the orientation of the slides, I did see a video that advised this, fingers crossed I manage to get that one right!
90
Misc / Open / Re: Thanks are overdue from Lazarus
« Last post by Laverda Dave on May 13, 2024, 10:45:10 PM »
Great sentiments Mick.
I totally agree, this is a great forum full of great and helpful people. Long may it continue 👍
Pages: 1 ... 7 8 [9] 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal