Honda-SOHC
Other Stuff => Member 4 Sales => Topic started by: Tony.B on February 16, 2024, 02:30:01 PM
-
I'm running out of space, and also the time to get other projects finished, so am offering a job lot of the parts I picked up before Christmas to anyone who could come to Woking, Surrey, and collect this lot in exchange for cash. There is a head, quite dirty inside, it was stuck to the barrels with some corrosion, but all looks to be recoverable. Probably a full rebuild with new valves and springs I should think. The barrel is useable, just a tiny chip at the bottom of one liner, but only on the chamfer at the bottom. More pictures could be supplied if interested. There are a couple of sets of pistons, but they don't look good. Rocker cover and breather cover. Set of carbs, (tried selling separately on the forum, but no takers), no manifolds. Two starter motor covers, one is quite presentable, the other fairly rusty. A set of yokes, another top yoke, several engine covers, plus some that aren't 500/4. One set of nos rings, I think 3rd oversize. The starter motor needs work, it shorts if connected to a battery. Other bits as in pictures, including three rear chain guards, one has intact holes, and a swinging arm.
£150 the lot if anyone is interested? I may have some boxes available, the grey and red ones I'm keeping.
Cheers, Tony.
-
Some more pictures......
-
Looks like there is grotty looking set of CB250K carbs in there. Are they available on their own please Tony?
-
Looks like there is grotty looking set of CB250K carbs in there. Are they available on their own please Tony?
Hi Ash, I can take some photos and let you see if they're what you want. If so, then yes, of course.
-
Ash, some pictures, one cv slide seems to work smoothly, the other has ally corrosion and doesn't move smoothly, so difficult to tell if the diaphragm is any good or not. No idea if the airbox manifold goes with these, perhaps you can tell me?
Cheers, Tony.
-
Thanks Tony .. those are actually CB350K carbs (i.e.Keihin model 722A) not CB250 .... so not really of any use to me but thanks for taking the trouble to photo them . Perhaps someone else on here may be interested. It really depends on the state of the rubber diaphragms.
The airbox is definitely not off a CB250/350K or a G5 model. Maybe someone else on here can identify.
-
Don’t suppose the starter motor cover is available separately?
-
Don’t suppose the starter motor cover is available separately?
It is, not perfect, there are a few rust spots, but as you can see it polishes up quite nicely, 7 out of 10 I would say. Pm me if interested and we can work out a price with postage. Cheers, Tony.
-
Thanks Tony .. those are actually CB350K carbs (i.e.Keihin model 722A) not CB250 .... so not really of any use to me but thanks for taking the trouble to photo them . Perhaps someone else on here may be interested. It really depends on the state of the rubber diaphragms.
The airbox is definitely not off a CB250/350K or a G5 model. Maybe someone else on here can identify.
Thanks for the ID Ash, if no interest here I'll try at the next Kempton, or eBay as a last resort. Cheers.
-
Oh, and I found this again, I was told it may be 250/350 circa late sixties early seventies.
-
Oh, and I found this again, I was told it may be 250/350 circa late sixties early seventies.
Yes those certainly look CB250/350K Tony.
The anorak in me tells me they are post 1969 as the bolts don't have the large '8' on them :) So K2->
-
Oh, and I found this again, I was told it may be 250/350 circa late sixties early seventies.
Yes those certainly look CB250/350K Tony.
The anorak in me tells me they are post 1969 as the bolts don't have the large '8' on them :) So K2->
Thanks for the info ;)
-
Hi all, just a heads-up, I'm at Kempton tomorrow with all the remaining Honda stuff, as described above. Really need to get rid now, I'll take offers on everything, including head, barrel, nos set of 3rd size piston rings, a tool tray, etc etc. Come and find me on stall 114, (back to the racecourse, pretty much in the middle), and take away armloads of Honda bits.
-
I might be going tomorrow, if so I’ll pop over and say hello.
-
Kemptons too far and boris tax too high for me
-
I might be going tomorrow, if so I’ll pop over and say hello.
Great!
-
Kemptons too far and boris tax too high for me
Shame, though it's outside all the zones.
-
UPDATE : carbs gone, all cylinder head covers gone, but I still have head and barrel. That random ignition/horn set has gone. Tool tray gone.
I do have several good clutches complete, (plus a couple from smaller models with that funny rear bracket). Sump cover, oil filter cover, swingarm with chain guard, at least one, or two complete gearbox clusters.
It still all fills four large boxes, it's not doing my hernia any good keep moving them! £150 for the lot if some one fancies coming to Woking and taking away, (only item not included is the two small covers in my separate ad).
Cheers, Tony.