Show Posts

61

CB750 / K0 Head Gasket

« on: October 06, 2015, 02:19:52 PM »

Hi Guys
Trying to track down a K0 Head gasket.
(one bolt hole on the center line) or do you bodge it with sealer.
(i know i wouldn't be happy with that either.)
Anyone know a decent supplier?

62

CB750 / K0 Fork seals

« on: October 04, 2015, 07:16:06 AM »

Hi Guys
Assembled my forks yesterday and came to the seals and seem to have another problem.
The seals i have bought marked 69/70 k0 are 48mm diameter ,this seems common through the range
problem is my slider recess is 46mm .
I cant seem to find any fork seals that od with an id of 35.
Anyone know any suppliers?
cheers Rich

63

Misc / Open / Even more of a bargain!!!!

« on: September 16, 2015, 09:38:26 PM »

http://www.ebay.co.uk/itm/Honda-CB750-K0-K1-K2-SOHC-Seat-Latch-69-72-/201394645343?hash=item2ee40e695f

64

Misc / Open / Bargain,I'll take 2

« on: September 16, 2015, 07:00:47 PM »

http://www.ebay.co.uk/itm/1969-69-HONDA-CB750-CB-750-K0-SANDCAST-PARTS-MANUAL-BOOK-CATALOG-/400995761406?hash=item5d5d35bcfe
Just see Ash's drop box

65

CB750 / Fork ring question

« on: September 13, 2015, 06:35:58 PM »

Hi Guys
New fork tubes, assembling components that came off of old tubes, i know i should have taken a photo,
but it's on the parts list but what does it do??
I hope the photo is self explanatory.
Cheers Rich

66

CB750 / Starter clutch gear side float.

« on: August 31, 2015, 08:22:16 PM »

Hi all
I had to change my crank shaft and took off the rotor and starter clutch gear from the original
crank and the side float between the back of the rotor and the first bearing is about 2mm this seems a lot to me.
I put the rotor back on the old crank and it is the same the only thing i have noticed is it looks like the rotor has spun and messed up the taper sometime in it's previous life.
I will get another rotor but would like someone out there to confirm my findings one way or the other please.
So anyone have their crank out with the rotor still on that can check the side movement of the starter gear.
it's a k0 the rotor has the flange on it.
Cheers Rich

67

Other Bikes / Suzuki Rear light

« on: April 17, 2015, 06:36:42 PM »

Hi Guys
Anyone identify these for me.
I know they are Suzuki ,Year/Model please.
The guard seems to be NOS ,the pits you can see are the spot welds holding on the various parts
Maybe a later model.
Anybody need them?
Rich

68

Misc / Open / Perhaps you get a free bike with this.

« on: April 07, 2015, 08:29:33 PM »

http://www.ebay.co.uk/itm/Honda-CB-750-K0-S-O-H-C-Front-Brake-Lever-Stop-Switch-1969-1970-/121568841084?pt=LH_DefaultDomain_3&hash=item1c4e114d7c

amazing!!!

69

Misc / Open / Any one out there in Coventry?

« on: December 29, 2014, 05:45:47 PM »

Hi Guys
While i feel very sorry for the City Link personel loosing there jobs, i have a problem.
I have 6 castings for 750 parts i'm making, these were going to be done over Christmas
but they were going from Hastings to Ashford Kent and according to City Link Ashford they are in
Coventry hub with no possible chance of delivery, collection only .Can anyone collect for me please ,all expenses paid.
and post them on.
Cheers Rich

70

Misc / Open / Snow

« on: December 08, 2014, 02:40:25 PM »

Looks like it's time to put the bikes away with all
on the snow on the forum

71

Misc / Open / any one recognise this rear guard

« on: November 28, 2014, 05:45:19 PM »

Hi All
Been talking to the guy re this guard, It's not a SOHC anyone any ideas?
he has a part number which is sohc but the guard isnt.

http://www.ebay.co.uk/itm/181596989898?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D181596989898%26_rdc%3D1

72

Misc / Open / paperwork necessary to register an import.

« on: November 18, 2014, 07:36:12 PM »

Hi All
I sure someone must know the answer to this.
I have an imported bike from the USA.
imported in 2012 I have a declaration of import number etc
is this all i will need to register it (after restoration).
I know i need to get a verification from Honda.
and a form from DVLA.
Cheers

73

CB750 / K0 finally here.

« on: November 06, 2014, 05:29:16 PM »

Well after several weeks the caterpillar has arrived (or should it be maggot)
hope to transform it into the red butterfly. The restored bike is frame number 420 younger than mine
seems spooky that they were probably in the factory together.
Lovely handlebars don't you think.
need lots of bits, i'll put a list up when i get it sorted.
Rich

74

CB750 / 69/70 rear mudguard

« on: November 02, 2014, 09:29:22 PM »

Can anyone please lend me a rear mudguard for a couple of days,i want to make
a former to straighten out a guard i have bought with a few dents in it.
condition doesen't matter as long as it's straight.
happy to pay any costs incurred.
Thanks Rich

75

Misc / Open / Anyone got any spare cash?

« on: October 19, 2014, 08:12:14 AM »

http://www.ebay.com/itm/Honda-CB-1969-honda-sandcast-k-o-cb-750-/251680714499?forcerrptr=true&hash=item3a9956ef03&item=251680714499&pt=US_motorcycles

Honda-SOHC

News:

Topics - RGP750