This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - RGP750
91
« on: May 10, 2014, 08:14:06 AM »
92
« on: May 09, 2014, 10:22:28 AM »
Is it possible to get the tank badges off and re use them?
any clues as to the best way to do it welcome.
Cheers Rich
93
« on: April 09, 2014, 08:03:05 PM »
Hi all ,not wanting to hijack Steff's KO carb problem, just noted Seamus has commented Keyster carb parts not good on sohc 's Having just paid DS £80 for a set and rebuilt the carbs ,if this comment founded, has anyone else used keyster and had no problems. concerned of Ashford 
94
« on: April 08, 2014, 07:18:27 PM »
Anyone recommend supplier of decent wheel rims,Anyone seen the quality of DS aftermarket against his DID ?
May have to go and have a look unless someone has already done it.
Rich
95
« on: April 04, 2014, 08:09:37 PM »
Have these 4 small ally ,rings left,have rebuilt the carbs and they were in the
same area of the bench so i imagine they go with them, Remember keeping them together but
now can,t see where they go.(silly old sod not making a note)
Cheers Rich
97
« on: April 01, 2014, 06:57:39 PM »
Cleaned carbs up and now to fit all of the new bits.
The needle is set at the second notch up,anyone know
if that is the standard setting.
cheers Rich
98
« on: March 11, 2014, 06:35:22 PM »
Hi All
Looking for oil supply came across Autoparts selling Castrol GTX 10w40 4ltrs at 50% off (list apparently £28-79)
for £14-95.
Having only just getting the bike on the road i'm sure this is what i used back in the 70s.
comments, before i buy please.
Cheers Rich
99
« on: February 24, 2014, 09:00:00 PM »
Having stripped my 750 into a million parts the weekend and with the help from my son to remove the engine decided to take the breather casting off seized up front screw,the only one i have come across during the strip. My son showed me a great way to remove it. Drill a hole in the top 2.5mm dia or so ,tap a torx bit into the hole,attach ratchet handle and hey presto out it came. Might be of use if you get stuck. Good luck Richard 
100
« on: February 20, 2014, 10:20:50 AM »
Having bought 750 back in September from guy, even older than me, giving up bikes. He gave me a receipt for full service ,mot ,collection and delivery service. so not ridden at all. I have done about 100 miles only on it before the rains came. Tried to get it going weekend and it ran poorly checked carbs,full of muck (despite service receipt saying carbs stripped,I think the old boy was stitched up) anyway i digress. I checked the HT leads last night and 2 and3 were the wrong way around how could it run?  Richard
101
« on: February 18, 2014, 07:34:00 PM »
Hi All
If i remove the breather cover is there enough room to get the
rocker cover off without taking the engine out of the frame?
Cheers Richard
102
« on: February 16, 2014, 08:37:37 PM »
I bought this 750 back in September ,A one owner from new even got original purchase receipt £890-00 and new 4 pipes (he didn't want to chance them going rusty so fitted motad, my Brucy bonus)
Thought i might keep it as original but after a few rides front break needs an overhaul Carbs keep blocking
so seeing as it was such a lovely day today decided to start.
Started to dismantle carbs but i'm stuck . Is the top shaft is it secured with captive pins?
see the photo (hope they up load )
Cheers Richard
103
« on: December 05, 2013, 01:04:16 PM »
Hi all I know back in the 70's we all threw away the metal plug cap covers so please don't shout at me. I'm considering making a batch if i can borrow an original as a master. Anyone out there can lend me a good /bad or plain ugly one i can take dimensions from?. Cheers 
104
« on: November 08, 2013, 05:02:39 PM »
Hi all DVLA records show my 1972 ; cb175 ,gold i bought new is out there somewhere,mot'd until May 2014. Love to see it again Reg No DKL54K. any clues welcome. Cheers safe riding
105
« on: November 06, 2013, 05:55:37 PM »
Hi I'm trying to find a 1972 CB 175 it's gold, I bought new. The bike is currently mot'd until May next year so is out there somewhere Reg number is DKL54K I tried sending form v888 to DVLA but they won't tell me. I'm in Kent ,any one who may see it or can give me any idea on tracking it down greatly appreciated. 
|
Show Posts