Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: oldtuggie on May 30, 2020, 09:26:07 AM
-
Hi
Can anyone confirm that I have fitted my Rocker shafts correctly.
I have fitted both the inner and outer shafts with the threaded ends of the shafts facing outwards towards the end caps, is this correct.
Thanks in advance for any replies
-
Hi
Can anyone confirm that I have fitted my Rocker shafts correctly.
I have fitted both the inner and outer shafts with the threaded ends of the shafts facing outwards towards the end caps, is this correct.
Thanks in advance for any replies
Threaded end = outer facing. That is how you insert the tool to pull them out ::)
-
Thanks
Just about to get engine into the frame and this doubt came into mind for some reason , I'll get on with it now I know they are correct