1
CB350/400 / Re: Paint codes
« on: July 15, 2020, 10:19:42 PM »
Thanks Trigger,👍
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 2
CB350/400 / Paint codes« on: July 15, 2020, 10:05:51 PM »
Hi guys ,
Does anyone know the paint codes for a 78 candy Antares red CB400F . Thanks 3
CB500/550 / Oil and cylinder pressures« on: June 06, 2020, 07:45:36 PM »
Hi Guys , could anyone let me know the cylinder compression and oil pressure PSI for a 550F2 . Just rebuilt the engine and i am just about to test the pressures before i fit back into the frame .
Thanks 4
CB500/550 / Re: Seat bracket« on: May 14, 2020, 11:23:55 PM »
Thank guys , always helpful as usual 👍
5
CB500/550 / Valve guides« on: May 14, 2020, 07:49:43 PM »
Would any of you guys recommend anyone who could replace the exhaust valve guides on a 550F2 in the north west area.
Thanks 6
CB500/550 / Re: Seat bracket« on: May 14, 2020, 07:47:39 PM »
Thanks guys I’ve checked and still cant see anywhere thats got them for sale . Searched the internet and nothing , there’s only a seat for sale with a hinge bracket in the US .
7
CB500/550 / Re: Seat bracket« on: May 13, 2020, 07:59:17 AM »
Thanks Byranj, it’s a 77 F2 , bought a new seat from DS but these do not come with any brackets , managed to get a seat plunger from eBay .
8
CB500/550 / Seat bracket« on: May 12, 2020, 09:38:27 PM »
Hi , has anyone got a spare seat bracket for sale that fastens the seat to the seat pins located on the frame.
Also I’ve bought a set of coils from DS and just want to check that the - connection connects to the black and white wire . Thanks 9
CB500/550 / Re: 550F3 wiring harness« on: May 04, 2020, 09:37:35 PM »
Can’t believed Silvers are selling bad quality looms , the guys whom made this were certainly colour blind , think they may have run out of green cable , they had even put a green sleeve over the main earthing lug lead .
Checked my old loom and all the handle bar switch wires match up perfectly. 10
CB500/550 / Re: 550F3 wiring harness« on: May 04, 2020, 04:33:51 PM »
Hi Oddjob ,I’ve checked my loom and its correct for a F2 as the handle bar switch wires have bullets and joins under the tank next to the coils .
I think i will refurb the original loom as its defiantly repairable. 11
CB500/550 / Re: 550F3 wiring harness« on: May 04, 2020, 04:25:27 PM »
The loom is a really bad copy as they’ve used different coloured cables as per original , spot the earth colour . See photo of the rear of the loom .
12
CB500/550 / Re: 550F3 wiring harness« on: May 04, 2020, 12:33:33 PM »
Just been checking the new wiring loom from DS and it seems that the green earth wire colours are now red and white on the replacement loom, very confused .
13
CB500/550 / Re: 550F3 wiring harness« on: May 04, 2020, 12:02:57 PM »
Thanks guys , but i am a bit confused about the wiring loom that I’ve bought from Silvers , it clearly states its for a F2 , i also bought a right hand switch gear genuine honda and the wiring colour does not match the switch wires .
14
CB500/550 / Re: 550F3 wiring harness« on: May 04, 2020, 11:20:46 AM »
So i am gathering that if the vin number starts with a 2 its then a F2 .
15
CB500/550 / Re: 550F3 wiring harness« on: May 04, 2020, 11:17:28 AM »
Ok must be me being a bit thick , checked on the frame number and I thought it was in the F3 range .
|