Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: Mr Helicop on December 10, 2019, 11:27:20 AM
-
Tidying the workshop after the rebuild and found this part and I can't see where it goes or what it's for - any ideas?
[attachimg=2]
-
Could be a bracket for an exhaust. Next time show it with a centimeter scale nearby.
-
Yes I agree, it looks like an exhaust hanger bracket.
-
I don't recognise that on a 500,
agreed it looks like an exhaust hanger,its nothing like the 4 pipe hangers.
it seems to have a cable guide ,
some idea of size would help
-
Its not, cant see properly but rh rear engine mount maybe from a 550
-
Its not, cant see properly but rh rear engine mount maybe from a 550
Not an engine mount - I have been riding the bike so I would have noticed that.
-
Looks like a seat hinge? Although the photo isn’t too clear, looks like the bottom edge is rolled to accept a hinge pin....??
-
I have looked through all the photos of the bike when I got it and found this - looks like the part but can't see why it's there or what its for - very strange!
[attachimg=2]
-
Centre stand bump stop? 🤔
-
Redundant bracket from a previous non OEM exhaust system 🤔
-
Whatever it is it wasnt on a 500 or 550 that left the factory
-
Mr Helicop has been tracked and traced. Transponder has come of.