Honda-SOHC
General => New Member Introductions => Topic started by: daz-j on January 10, 2019, 08:11:16 PM
-
Hello all I'm Darren, I've been reading great posts on the forum for a while and thought it was about time i took the plunge! I'm early into a 400F project, my first motorcycle restoration of any kind. The bike is a '77 (R) which if i manage to attach a photo you'll see needs a lot of tlc, though it was a runner when I bought it. Currently stripped, frame powder coated, just about to send hubs for vapour blasting, then likely a large bill from David Silver to get back to rolling chassis.
I'm in Burnley so would be great to hear from local owners, if only to remind me where all the bits go!
Looking fwd to learning and hopefully contributing.
[attachimg=1]
Best regards, Darren.
-
Welcome to the forum Darren. At least it was a runner when you bought it....thats more than what a lot if forum members can say about their bikes 😀 Good luck.
-
Used to live in Tottington but now Gloucester. Still welcome
-
Welcome Darren
-
Welcome to the forum with your 400
-
Welcome Darren enjoy the journey ;D
-
Hi Darren, welcome to the forum - plenty of help, advice and banter for you to indulge in on here (as you are probably already aware of!)
I'm not far away in Wigan
-
Welcome to the 400four forum. It'll be good to compare the before and after pictures. Hope everything goes to plan.
-
Used to live in Tottington but now Gloucester. Still welcome
Welcome Darren you are among good buddies on here. From Yorks but used to go to Accrington a lot on business many years ago around the time the M66 was built.....so many, many years ago.
Bryan ...did you ever bump into this lady :D
[attachimg=1]
Manuals here: --
CB400F PARTS
https://www.dropbox.com/s/u51uf0p1dv6m29q/Honda%20CB400%20F%20Parts%20Manual.pdf?dl=0
CB400F PARTS USA Searchable
https://www.dropbox.com/s/j0hysqub5jsfg46/400-4%20Part%20List%201975%20searcheable.pdf?dl=0
CB350/400F SHOP MANUALWORKSHOP
https://www.dropbox.com/s/1n3w5433jkph228/350F%20400F%20_4%20Shop%20Manual.pdf?dl=0
CB350F Part Manual
https://www.dropbox.com/s/7pieydvznvy7nhp/CB350_F_F1%20Full.pdf?dl=0
CB400F DEALER SETUP INSTRUCTIONS .. RARE !!
https://www.dropbox.com/s/ewl1d9td0nhxeya/CB400_set-up_man.pdf?dl=0
-
Only in the video set i have! Does anybody NOT have the Wallace & Grommett set?
-
Welcome Darren, 400/4's will soon rule the world, they must have made an awful lot of them, or they survive well in barns