Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: gordo on December 20, 2016, 03:45:26 PM

Title: Dynatek leads and stock plug caps
Post by: gordo on December 20, 2016, 03:45:26 PM

Hi guys dumb question time. Fitting  5 ohm dynatek coils and dynatek leads which have plug caps pre formed, any need to cut pre formed caps off and fit ngk 5 ohm caps?
Cheers gordon

Title: Re: Dynatek leads and stock plug caps
Post by: mike the bike on December 20, 2016, 05:22:37 PM

Up to you.  I've got Dyna 5ohm coils and use the NGK HT caps.

Title: Re: Dynatek leads and stock plug caps
Post by: JustcallmeMrT on December 20, 2016, 06:02:11 PM

I used the dynatek caps.

Sent from my SM-N9005 using Tapatalk

Title: Re: Dynatek leads and stock plug caps
Post by: gordo on December 20, 2016, 06:07:16 PM

Cheers guys just wanted to check as have a set of caps if need. Will run the dyna caps and see.

Title: Re: Dynatek leads and stock plug caps
Post by: deltarider on December 20, 2016, 06:20:33 PM

But you need resistors, either in the caps or in the plugs ("R"), so check if your Dynatek leads/caps have built in resistors.