Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: billdn on August 26, 2018, 11:17:39 AM
-
I need the grommet for the top of the left hand crankcase cover,I can't find a part number- is it easy to make one or does anyone know who makes them or how. Ideally also need the one that goes around feeds from stator and field coil also.
-
No separate part number, its all part of the loom. You could cut one out of a block of rubber, if you have the patience.
[attachimg=1]
Same as....no separate part number
[attachimg=2]
-
You could try Steve at 400fourbits.co.uk
He may have a useable one.
Peter
-
I bought the leads from Steve 400/4 bits at a reasonable cost
-
The grommet is part of the sub-loom item No. 31110-333-000
I made a batch recently (as image) PM me if you are still looking for one.