This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - paul G
Pages: 1 ... 105 106 [107]
1591
« on: May 03, 2013, 12:21:17 PM »
Hi Jon,
Welcome to the group, I am from Brinsworth near Rotherham S. Yorks.
I have a restored 76 400 4 which I am riding and also have a 550 K3 project on going.
Regards,
1592
« on: April 03, 2013, 12:54:12 PM »
Hi All,
As the switchgear for the K3 is discontinued and virtually impossible to get hold of can anyone confirm that this is the same as the 400/4 except the connectors on the end.
These are quite easily obtainable and should be quite easy to convert, just not sure if everything else is the same.
Thanks
1593
« on: April 02, 2013, 12:17:44 PM »
Found it and ordered one thanks.
1594
« on: April 02, 2013, 12:08:49 PM »
Thanks will have a look is it in the 550 section.
Regards,
1595
« on: April 02, 2013, 11:37:58 AM »
Hi all,
Has anyone found a plug socket to fit cylinders 2 and 3 or does it need to be a box spanner !!
My socket will not go past the head cover.
Regards,
1596
« on: March 20, 2013, 08:24:38 AM »
It depends on how many coats you intend putting on there. I did mine with a couple of coats and 500ml with thinners was ample for this. I used more lacquer but put several coats on.
1597
« on: February 28, 2013, 08:30:53 AM »
Get some new cord and make some new ones far cheaper.
Cord can be easily obtained on eBay.
Regards,
1598
« on: February 28, 2013, 08:24:37 AM »
Hi,
Can anyone recommend a good chrome plating company in the Sheffield area.
Someone told me Prestige plating in Barnsley, I found a number for them but no one answers.
Cheers
1599
« on: February 26, 2013, 12:18:40 PM »
I have just had my frame and other parts blasted and powder coated and would recommend LSN coatings in Castleford I live in Rotherham and it is only 30 mins up the motorway.
Regards
1600
« on: February 14, 2013, 06:19:59 PM »
Log book states black but that could have been changed but as far as I am aware these are the Honda details
1977 CB550 K3
Engine#: CB550E-2000001-
Frame#: CB550-2000007-
Colors: Excel Black
Remarks: tank stripe red w/gold; gold side cover emblem, "550 Four K"
1601
« on: February 13, 2013, 12:15:09 PM »
RS have phoned me today and they don't do it any other suggestions.
Regards,
1602
« on: January 31, 2013, 12:38:40 PM »
Hi,
Just started my second restoration project a CB550 K3.
If anyone is looking for some powder coating done I would recommend LSN coatings in Castleford CHEAP and a first class job.
CB550 frame blasted and coated £85.
Regards,
1603
« on: January 30, 2013, 06:25:09 PM »
Hi all,
New to the UK forum but been on the US one for some time.
I have recently finished the restoration of a CB400 4 F1 and moved onto my latest restoration a 78 CB550 K3 (77 model by the frame/engine No's). I am looking for any information on the paint (Excel Black) I believe, has anyone found a match for this if so have you got a paint code.
Regards,
Pages: 1 ... 105 106 [107]
|
Show Posts